C-2/C-3 Hydrocarbon Separation by Pressure Swing Adsorption on MIL-100(Fe)

• Tipo: Artigo em Revista Científica Internacional
• Data: 2020

Autores

Vanessa F. D. Martins (Autor) FEUP; Rute Seabra (Autor) FEUP; Paulo Silva (Autor) Outra; Ana M. Ribeiro (Autor) FEUP; Kyung Ho Cho (Autor) Outra; U-Hwang Lee (Autor) Outra; Jong-San Chang (Autor) Outra; José M. Loureiro (Autor) FEUP; Alírio E. Rodrigues (Autor) FEUP; Alexandre Ferreira (Autor) FEUP

Revista

Título: Industrial & Engineering Chemistry Research

Vol. 59

Páginas: 10568-10582

ISSN: 0888-5885

Editora: American Chemical Society

Indexação

ISI Web of Knowledge - 0 Citações

ISI Web of Science

Scopus - 2 Citações

Projetos Associados

LA LSRE-LCM - Financiamento Plurianual 2020-2023 para a Unidade LA LSRE-LCM Laboratório de Processos de Separação e Reacção - Laboratório de Catálise e Materiais

AIProcMat@N2020 - Advanced Industrial Processes and Materials for a Sustainable North Region of Portugal2020

Outras Informações

ID Authenticus: P-00S-A7X

DOI: 10.1021/acs.iecr.0c00410

Abstract (EN): The main objective of this work is the separation of 0.30/0.70 ethane/propane and 0.30/0.70 ethylene/propane by pressure swing adsorption (PSA) on MIL-100(Fe). The metal-organic framework MIL-100(Fe) was proposed as a potential adsorbent due to its high C-2/C-3 selectivity. Since adsorption equilibrium data are essential for the process design, the adsorption isotherms of ethane, ethylene, and propane were measured at 323, 373, and 423 K by a gravimetric method. Fixedbed experiments were conducted at 0.5 SLPM, 323 K, and 150 kPa feed conditions on a bench-scale vacuum PSA (VPSA). Equilibrium and dynamic studies confirmed the preferential adsorption of propane over ethane and ethylene, with a high adsorption separation factor. Two five-step VPSA cycles with two different feed compositions, 0.30 ethane/0.70 propane, and 0.30 ethylene/0.70 propane, at 323 K and 150 kPa on MIL-100(Fe) were designed and performed experimentally. The performance parameters demonstrated the high viability of the proposed processes, since ethane purity of 99.5% was achieved, and with a high ethane recovery (86.7%). In the same cycle, 99.4% of propane was recovered with 97.0% purity. In cycle scheme 2, an ethylene purity of 100.0% was achieved. The propane was 100% recovered with a purity of 94.7%.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 15