On the optimization of a wind tunnel by CFD

• Tipo: Poster em Conferência Nacional
• Data: 2011

Autores

Soraia Neves (Autor) FEUP; João Campos (Autor) FEUP; Tiago Santos (Autor) Outra

Conferência Nacional

4th Meeting of Young Researchers of U. Porto (IJUP 11)

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia química

Outras Informações

Abstract (EN): Clothing consumers are becoming more demanding about products quality and associated comfort. In order to meet this demand it is important to improve techniques and methods to evaluate the performance of products in representative conditions. The clothing thermal performance can be evaluated using thermal manikins and climate chambers (Fig. 1). The former allows the monitoring of heat losses across the garments whereas the latter allows the precise control of the test conditions (temperature, humidity and air speed). The purpose of this project is to adapt the geometry of an existing climatic chamber to allow the imposition of wide range of air speeds [1-2]. Therefore, a computational tool (COMSOL Multiphysics 3.5) was used to simulate numerically the fluid flow inside the chamber, in order to identify ways to homogenise the velocity profile inside a ¿wind tunnel¿ to be placed in the chamber interior. Several parameters were studied, namely the test zone position, the shape of the climate chamber corners and the wind tunnel geometry. The wind tunnel was found to assure more symmetrical velocity profiles when placed at the chamber centre, whereas the chamber corners were found to have negligible influence on the velocity profiles at the test zone and. The shape of the wind tunnel contraction was optimized (Fig. 2).

Idioma: Português

Tipo (Avaliação Docente): Científica