Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > A non-conforming plate facet-shell finite element with drilling stiffness

A non-conforming plate facet-shell finite element with drilling stiffness

Título
A non-conforming plate facet-shell finite element with drilling stiffness
Tipo
Artigo em Revista Científica Internacional
Ano
2011
Autores
J. Dias Rodrigues
(Autor)
FEUP
Revista
Vol. 47
Páginas: 973-981
ISSN: 0168-874X
Editora: Elsevier
Outras Informações
ID Authenticus: P-002-NKH
Abstract (EN): When a facet-shell finite element is used to represent a three-dimensional geometry, an incomplete connection of the rotations between adjacent finite elements may occur. Infact, the in-plane rotations from one finite element may not assemble correctly to the rotation degrees-of-freedom of an adjacent finite element, simply because there is a missing rotation degree-of-freedom, the out-plane rotation. To avoid this difficulty, the facet-shell formulation must provide a complete description of the nodal translation and rotation fields, allowing the definition of the six spatial degrees-of-freedom for each node of the finite element. Despite the huge interest on providing a solution for this issue, which is demonstrated by the sporadic but remarkable studies on the subject published by renowned researchers in the field, there is still a lack in valuable, accurate and cost effective solutions, especially for quadrilateral finite elements. In this study a non-conforming quadrilateral facet-shell finite element, providing a complete degrees-of-freedom field, is formulated and analyzed. The assessment of the proposed finite element is performed by comparing the numerical results from a set of usually applied benchmark problems with those obtained from classic and up-to-date finite elements with drilling stiffness and a similar finite element without out-plane rotation. The proposed finite element is capable to model planar and non-planar structures, and the numerical results achieved with its application onto several case studies proved its accuracy and the ability to describe the complete displacement field.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 9
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Dos mesmos autores

Comportamento Dinâmico de Placas com Tratamento Passivo por Amortecimento Viscoelástico (1997)
Artigo em Revista Científica Nacional
Rui António Moreira; José Dias Rodrigues
Static and dynamic characterization of composition cork for sandwich beam cores (2010)
Artigo em Revista Científica Internacional
Rui António Moreira; Francisco Queirós Melo; J. Dias Rodrigues
Multilayer Damping Treatments: Modeling and Experimental Assessment (2010)
Artigo em Revista Científica Internacional
Rui António Moreira; J. Dias Rodrigues
Constrained damping layer treatments: Finite element modeling (2004)
Artigo em Revista Científica Internacional
Rui António Moreira; José Dias Rodrigues
A layerwise model for thin soft core sandwich plates (2006)
Artigo em Revista Científica Internacional
Rui António Moreira; J. Dias Rodrigues

Ver todas (9)

Da mesma revista

3D modelling of heat transfer and moisture transport in young HPC structures with hybrid finite elements (2017)
Artigo em Revista Científica Internacional
Cuong, PT; Teixeira de Freitas, JAT; Rui Faria
Vibration analysis of rotating 3D beams by the p-version finite element method (2013)
Artigo em Revista Científica Internacional
S. Stoykov; P. Ribeiro
Simulating 3D printing on hydrogel inks: A finite element framework for predicting mechanical properties and scaffold deformation (2024)
Artigo em Revista Científica Internacional
Pouca, MCPV; Cerqueira, MRG; Ferreira, JPS; Darabi, R; Ramiao, NAG; Sobreiro-Almeida, R; Castro, APG; Fernandes, PR; Mano, JF; Renato Natal Jorge; Parente, MPL
Sheet metal forming simulation using EAS solid-shell finite elements (2006)
Artigo em Revista Científica Internacional
parente, mpl; valente, raf; jorge, rmn; cardoso, rpr; de sousa, rja
Sensitivity analysis based crack propagation criterion for compressible and (near) incompressible hyperelastic materials (2014)
Artigo em Revista Científica Internacional
Primo¸ ¦u¨tarič; Mariana R. R.Seabra; Jose M.A. Cesar de Sa; Toma¸ Rodič

Ver todas (21)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Centro de Desporto da Universidade do Porto I Termos e Condições I Acessibilidade I Índice A-Z
Página gerada em: 2025-10-02 às 14:03:57 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico