A simple ESR identification methodology for Electrolytic Capacitors conditon monitoring

• Tipo: Artigo em Livro de Atas de Conferência Internacional
• Data: 2007

Autores

A. Vicente T. leite (Autor) FEUP; Henrique J. A. Teixeira (Autor) FEUP; A. J. Marques Cardoso (Autor) Outra; Rui Esteves Araújo (Autor) FEUP

Ata de Conferência Internacional

Título: Proceedings of the 20th International Congress on Condition Monitoring and Diagnostic Engineering Management, COMADEM’07

Páginas: 75-84

20th International Congress on Condition Monitoring and Diagnostic Engineering Management, COMADEM’07

Faro (Portugal), 13 a 15 de Junho de 2007

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia electrotécnica, electrónica e informática

CORDIS: Ciências Tecnológicas > Engenharia > Engenharia electrotécnica

Outras Informações

ID Authenticus: P-010-VGF

Abstract (EN): Electrolytic capacitors are usually used in power electronic systems for smoothing, energy storage or filtering. They have the best overall performance for these objectives being a critical element in the design of these systems, in several applications, with different requirements. But, infortunately, in most cases, they are the most life-limiting device. The expected life of electrolytic capacitors depends on their internal temperature and is determined by the ratio of the electrolyte solution evaporation used in their fabrication. The deterioration caused by this evaporation is reflected in electrical parameters, mainly the equivalent series resistance (ESR). As the volume of the electrolyte decreases, ESR increases and capacitance decreases. Additionally, the increase in ESR has a positive feedback effect since it leads the temperature to increase and this in turn leads to further evaporation of the electrolyte leading to the ESR increase and so forth. This paper presents a simple ESR identification methodology for electrolytic capacitors condition monitoring in view of preventive maintenance to signal the need of maintenance and or replacement. The identification methodology is based on a simple continuous-time model and some recursive prediction error methods, namely, Kalman filter, gradient and orgetting factor approaches. Simulation and experimental data acquired from a step down converter were used with these algorithms. The identification methodology is also suitable for different power converter topologies.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 10