Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Adsorption of Sudan IV from oily wastewater by using modified activated carbon materials

Adsorption of Sudan IV from oily wastewater by using modified activated carbon materials

Título
Adsorption of Sudan IV from oily wastewater by using modified activated carbon materials
Tipo
Artigo em Livro de Atas de Conferência Internacional
Ano
2016
Autores
Díaz de Tuesta, Jose Luis
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Guliyeva, Rima
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Martin-Martinez, Maria
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Faria, Joaquim
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Gomes, Helder
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Outras Informações
ID Authenticus: P-011-1W9
Abstract (EN): A commercial activated carbon (AC: Norit ROX 0.8, D = 0.8 mm) was modified by chemical and thermal processes, following the procedures described elsewhere [1]. The materials were tested as adsorbents for the removal of a lipophilic pollutant, Sudan IV (S-IV), using a biphasic medium (water/cyclohexane) in order to simulate contaminated petroleum mixtures with water [2]. The AC was modified in successive steps considering: (1) grinding and sieving (< 250 ¿m) and (2) treatment with nitric acid, followed by hydrotreatment with urea and thermal treatment at 800 ºC under inert atmosphere, resulting in the adsorbents PAC and PACNAUT, respectively. Adsorption experiments were performed in a 500 mL batch glass reactor, using 2.5 g of adsorbent per litre of organic phase, 2.5 g/LOP. Fig.1A shows results with different particle size (ps), initial S-IV concentration (CS-IV,0) and AC modifications. As expected, it can be observed that adsorption is faster when ps is smaller. However, the powdered activated carbon (PAC) is not able to adsorb all S-IV in high initial concentration (500 mg/L). This target was achieved with PACNAUT (adsorption of S-IV was 90 % at 1 h and 2.5 g/LOP of adsorbent, higher than the removal observed by other authors [2] at the same time and 4 g/LOP of material). The adsorption kinetics was fitted by a pseudo-second-order model to the data obtained with 500 mg/L of CS-IV,0 (Fig. 1B). PACNAUT has higher adsorption capacity (qe) and rate constant (kS).
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Documentos
Não foi encontrado nenhum documento associado à publicação.
Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Centro de Desporto da Universidade do Porto I Termos e Condições I Acessibilidade I Índice A-Z
Página gerada em: 2025-10-13 às 02:55:37 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico