Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > The effect of hybridization on the GFRP behavior under high velocity impact

The effect of hybridization on the GFRP behavior under high velocity impact

Título
The effect of hybridization on the GFRP behavior under high velocity impact
Tipo
Artigo em Revista Científica Internacional
Ano
2009
Autores
R. J. Muhi
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
F. A. Najim
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Marcelo F. S. F. de Moura
(Autor)
FEUP
Revista
Vol. 40
Páginas: 798-803
ISSN: 1359-8368
Editora: Elsevier
Indexação
Classificação Científica
FOS: Ciências da engenharia e tecnologias > Outras ciências da engenharia e tecnologias
Outras Informações
ID Authenticus: P-003-DT3
Abstract (EN): In the present study, experimental and analytical investigations for the behavior of E-glass fiber reinforced composite hybridized with a layer of Kevlar 29 fiber, under high velocity impact, were performed. The experimental work includes the placement of the Kevlar layer at four different locations to verify the effects of the stacking sequence on the impact behavior. Three different projectile geometries, namely, flat-ended, hemispherical and conical were used. The experimental results reveal that hybridization improves the laminates performance under dynamic penetration. The results also indicate that the laminates response was found to be highly sensitive to the projectile geometry. In the case of analytical modeling, two energy models were conducted to calculate the projectile residual velocities. The results obtained from the two models were compared with those obtained experimentally and some conclusions were drawn.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Contacto: mfmoura@fe.up.pt
Nº de páginas: 6
Documentos
Não foi encontrado nenhum documento associado à publicação com acesso permitido.
Publicações Relacionadas

Da mesma revista

Review on techniques to improve the strength of adhesive joints with composite adherends (2019)
Outra Publicação em Revista Científica Internacional
Shang, X; Marques, EAS; Machado, JJM; Ricardo Carbas; Jiang, D; da Silva, LFM
Design and optimization of self-deployable damage tolerant composite structures: A review (2021)
Outra Publicação em Revista Científica Internacional
Pedro Fernandes; Ricardo Pinto; Nuno Correia
Toughness of a brittle epoxy resin reinforced with micro cork particles: Effect of size, amount and surface treatment (2017)
Artigo em Revista Científica Internacional
Barbosa, AQ; da Silva, LFM; Abenojar, J; Miguel Figueiredo; Oechsner, A
Through-the-thickness stress profiles in laminated composite and sandwich structure plates via unified formulation (2016)
Artigo em Revista Científica Internacional
Caliri, MF; Ferreira, AJM; Tita, V

Ver todas (69)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Centro de Desporto da Universidade do Porto I Termos e Condições I Acessibilidade I Índice A-Z
Página gerada em: 2025-10-06 às 22:06:25 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico