Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Hygrometric Assessment of Internal Relative Humidity in Concrete: Practical Application Issues

Hygrometric Assessment of Internal Relative Humidity in Concrete: Practical Application Issues

Título
Hygrometric Assessment of Internal Relative Humidity in Concrete: Practical Application Issues
Tipo
Artigo em Revista Científica Internacional
Ano
2014
Autores
J. L. Granja
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Miguel Azenha
(Autor)
Outra
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
Joaquim Barros
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Revista
Vol. 12
Páginas: 250-265
ISSN: 1346-8014
Classificação Científica
FOS: Ciências da engenharia e tecnologias > Engenharia civil
Outras Informações
ID Authenticus: P-009-V95
Abstract (EN): The use of embedded relative humidity (RH) sensors for assessing the internal humidity in concrete is widely spread, dully backed by existing standards. Even though the approaches adopted in the literature seem to have several differences between each other, few or none research works were found to focus on the comparison of performance of sensors and methods for RH measurement. In view of this, several sets of experiments comparing the performances of different sensors and monitoring procedures will be presented in this paper, discussing the main findings and providing recommendations for the strategies to be adopted in what concerns the measurement technique. The main points addressed in this work are: (i) comparisons between readily available systems for RH measurement in concrete, as well as custom measurement strategies reported in the literature; (ii) issues related to calibration procedures and re-calibration necessity; (iii) relevance of the existence of an interface porous material between the embedded sensor and the measurement spot in concrete; (iv) importance of the size of the embedment body into which the RH sensor is inserted; (v) equivalence of results obtained when the probe is constantly inserted into the embedment body, or placed inside it at discrete instants.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 16
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Da mesma revista

Thermo-Hygro-Mechanical Simulation of Cracking in Thick Restrained RC Members: Application to a 50 cm Thick Slab (2019)
Artigo em Revista Científica Internacional
Claúdio Ferreira; Carlos Sousa; Rui Faria; Miguel Azenha; Mário Pimentel
Comparison Between Different Experimental Techniques for Stiffness Monitoring of Cement Pastes (2014)
Artigo em Revista Científica Internacional
Granja, JL; Azenha, M; de Sousa, C; Cristiana Ferreira
Capillary transport of water in cracked and non-cracked UHPFRC specimens (2019)
Artigo em Revista Científica Internacional
Ana Mafalda Matos; Sandra Nunes; José L. Barroso Aguiar
Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Centro de Desporto da Universidade do Porto I Termos e Condições I Acessibilidade I Índice A-Z
Página gerada em: 2025-10-07 às 14:16:20 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico