Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Reinforcement design for the combined effect of restrained shrinkage and applied loads in slabs: a design challenge

Reinforcement design for the combined effect of restrained shrinkage and applied loads in slabs: a design challenge

Título
Reinforcement design for the combined effect of restrained shrinkage and applied loads in slabs: a design challenge
Tipo
Artigo em Livro de Atas de Conferência Internacional
Ano
2019
Autores
Miguel Azenha
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Carlos Sousa
(Autor)
FEUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
José Granja
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
B. Zahabizadeh
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Outras Informações
Resumo (PT):
Abstract (EN): The quantification of the necessary reinforcement for crack width control in highly restrained RC slabs still remains a subject of discussion in both scientific and practitioner communities, particularly when the simultaneous effects of applied loads and restrained shrinkage deformations are considered. Indeed, different authors/designers follow distinct approaches to deal with the problem. This is however a very important matter, because in slabs, the quantity of reinforcement is frequently determined by Service Limit States (SLS) of cracking. Therefore, the use of different design criteria for SLS can bring different performance levels, and also different global costs (e.g. reinforcement can be overdesigned, or under designed and then repairs may be in order). In such context, this paper presents and analyses the results of a design challenge launched by the research teams at UMinho and UPorto to a set of design offices. The design challenge consists in the sizing of the necessary reinforcement to satisfy adequate cracking performance in a highly restrained slab. All information about geometry, materials, loads and boundary conditions are provided in the design challenge sheet provided to participants. A total of 7 teams have provided answers to this design challenge. Results are treated anonymously in regard to participating teams. A discussion is held with basis on common and differentiating points, and finally an analysis of the authors using non-linear finite element analysis is made, targeting to better assist interpretation of the expectable behaviour of reinforcement solutions.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 8
Documentos
Não foi encontrado nenhum documento associado à publicação com acesso permitido.
Publicações Relacionadas

Dos mesmos autores

Regulatory framework and recommendations for RC design considering the effects of shrinkage (2017)
Resumo de Comunicação em Conferência Nacional
José Granja; Miguel Azenha; Rui Faria; Carlos Sousa; B. Zahabizadeh
Overview of difficulties in design associated to concrete shrinkage (2017)
Resumo de Comunicação em Conferência Nacional
Miguel Azenha; José Granja; Rui Faria; Carlos Sousa; B. Zahabizadeh
Design challenge for reinforcement in a highly restrained slab. (2017)
Resumo de Comunicação em Conferência Nacional
Miguel Azenha; Carlos Sousa; B. Zahabizadeh; José Granja; Rui Faria
Método Experimental para o Estudo do Efeito Combinado de Cargas Aplicadas e Retração impedida em Lajes de Betão (2018)
Artigo em Livro de Atas de Conferência Nacional
José Gomes; Miguel Azenha; José Granja; Rui Faria; Carlos Sousa; B. Zahabizadeh; A. Edalat-Behbahani; Dirk Schlicke; Carlos Rodrigues
Thermo-Hygro-Mechanical Modelling of Concrete Structures in Service Life: a Multi-Scale Approach in the IntegraCrete Project (2017)
Artigo em Livro de Atas de Conferência Internacional
Miguel Azenha; Rui Faria; José Granja; Carlos Sousa; R. Carvalho; Hadi Mazaheripour; B. Zahabizadeh

Ver todas (6)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Centro de Desporto da Universidade do Porto I Termos e Condições I Acessibilidade I Índice A-Z
Página gerada em: 2025-10-18 às 21:11:42 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico