Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Effect of tow thickness on the structural response of aerospace-grade spread-tow fabrics

Effect of tow thickness on the structural response of aerospace-grade spread-tow fabrics

Título
Effect of tow thickness on the structural response of aerospace-grade spread-tow fabrics
Tipo
Artigo em Revista Científica Internacional
Ano
2017
Autores
Catalanotti, G
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Xavier, J
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Linde, P
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Camanho, PP
(Autor)
FEUP
Revista
Título: Composite StructuresImportada do Authenticus Pesquisar Publicações da Revista
Vol. 179
Páginas: 208-223
ISSN: 0263-8223
Editora: Elsevier
Outras Informações
ID Authenticus: P-00N-0AC
Abstract (EN): The effect of ply thickness on the onset of intralaminar and interlaminar damage is extremely important for the structural response of laminated composite structures. This subject has gained particular interest in recent years due to the introduction in the market of spread-tow, ultra-thin carbon-fibre reinforcements with different configurations. In the present paper, an experimental test campaign was carried out to study the structural response of aerospace-grade plain weave spread-tow fabrics (STFs) of different areal weights. The results showed that, in spite of an apparent superior longitudinal tensile strength of the thick STF, the multidirectional thin-STF laminate exhibited an improved tensile unnotched strength over the thick-STF laminate, attributed to its damage suppression capability. However, damage suppression was also responsible for similar tensile notched strengths. In compression, the thin-STF laminate performed substantially better than the thick-STF laminate in both unnotched and notched configurations. Finally, a similar bearing response was obtained in both STF laminates, in spite of a slightly higher resistance of the thin-STF laminate to the propagation of subcritical damage mechanisms.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 16
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Dos mesmos autores

Structural response of aerospace-grade thin-ply woven and non-crimp fabrics (2017)
Artigo em Livro de Atas de Conferência Internacional
Arteiro, A; Catalanotti, G; Xavier, J; Linde, P; Camanho, PP

Da mesma revista

Smart composites and composite structures In honour of the 70th anniversary of Professor Carlos Alberto Mota Soares (2016)
Outra Publicação em Revista Científica Internacional
Benjeddou, A; Araujo, AL; Carrera, E; Reddy, JN; António Torres Marques; Mota Soares, CMM
Simplified stress analysis of functionally graded single-lap joints subjected to combined thermal and mechanical loads (2018)
Outra Publicação em Revista Científica Internacional
Paroissien, E; da Silva, LFM; Lachaud, F
Reinforcement of CFRP single lap joints using metal laminates (2019)
Outra Publicação em Revista Científica Internacional
Morgado, MA; Ricardo Carbas; Marques, EAS; da Silva, LFM
Multifunctional Material Systems: A state-of-the-art review (2016)
Outra Publicação em Revista Científica Internacional
Ferreira, ADBL; Novoa, PRO; António Torres Marques

Ver todas (198)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Centro de Desporto da Universidade do Porto I Termos e Condições I Acessibilidade I Índice A-Z
Página gerada em: 2025-10-16 às 15:53:46 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico