Resumo (PT):
Revestimentos de polipirrol homogéneos e aderentes foram obtidos sobre
eléctrodos de zinco previamente tratados numa solução aquosa de sulfureto
em meio de acetonitrilo com p-tolueno-sulfonato de tetraetilamónio,
e em meio aquoso de tartarato sem qualquer pré-tratamento químico ou
electroquímico do eléctrodo de trabalho. As análises por XPS e AES mostraram
que a dissolução dos eléctrodos de trabalho é inibida no primeiro
meio de polarização pelo óxido e sulfureto de zinco formados sobre a superfície
durante o pré-tratamento em Na2S 0,2 M após 12 h, ou pelo filme
de tartarato de zinco desenvolvido sobre o eléctrodo no segundo meio de
polarização. A adesão, compacidade e comportamento à corrosão em HCl
0,1 M dos revestimentos de polipirrol obtidos a partir da solução de tartarato
são melhores do que os provenientes do meio de acetonitrilo.
Abstract (EN):
Homogeneous and adherent polypyrrole coatings have been achieved
on zinc electrodes previously treated with an aqueous solution of
sulfide in the acetonitrile medium with tetraethylammonium p-toluene
sulfonate, and in the tartrate aqueous medium without any chemical
or electrochemical pretreatment of the working electrode. The XPS
and AES analysis showed that the dissolution of the working electrodes
is inhibited in the first polarization medium by the oxide and zinc
sulfide formed on the surface during the pretreatment in 0.2 M Na2S
after 12 h, or by the zinc tartrate film developed through the electrode
polarization in the second. The adherence, compactness and corrosion
performance in 0.1 M HCl of the polypyrrole coatings from the tartrate
solution are higher than those obtained from acetonitrile medium.
Language:
English
Type (Professor's evaluation):
Scientific