On a New Optimization Approach for the Hydroforming of Defects-Free Tubular Metallic Parts

• Tipo: Artigo em Livro de Atas de Conferência Internacional
• Data: 2011

Autores

caseiro, jf (Autor) Outra; valente, raf (Autor) Outra; andrade-campos, a (Autor) Outra; jorge, rmn (Autor) FEUP

Ata de Conferência Internacional

Título: 14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS

Páginas: 1689-1694

14th International Conference on Material Forming Esaform

Belfast, NORTH IRELAND, APR 27-29, 2011

Indexação

ISI Web of Knowledge - 0 Citações

Scopus - 0 Citações

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Outras ciências da engenharia e tecnologias

Outras Informações

ID Authenticus: P-002-X2B

DOI: 10.1063/1.3589759

Abstract (EN): In the hydroforming of tubular metallic components, process parameters (internal pressure, axial feed and counter-punch position) must be carefully set in order to avoid defects in the final part. If, on one hand, excessive pressure may lead to thinning and bursting during forming, on the other hand insufficient pressure may lead to an inadequate filling of the die. Similarly, an excessive axial feeding may lead to the formation of wrinkles, whilst an inadequate one may cause thinning and, consequentially, bursting. These apparently contradictory targets are virtually impossible to achieve without trial-and-error procedures in industry, unless optimization approaches are formulated and implemented for complex parts. In this sense, an optimization algorithm based on differential\evolutionary techniques is presented here, capable of being applied in the determination of the adequate process parameters for the hydroforming of metallic tubular components of complex geometries. The Hybrid Differential Evolution Particle Swarm Optimization (HDEPSO) algorithm, combining the advantages of a number of well-known distinct optimization strategies, acts along with a general purpose implicit finite element software, and is based on the definition of a wrinkling and thinning indicators. If defects are detected, the algorithm automatically corrects the process parameters and new numerical simulations are performed in real time. In the end, the algorithm proved to be robust and computationally cost-effective, thus providing a valid design tool for the conformation of defects-free components in industry [1].

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 6