Design parameters of Portuguese granitic residual soils obtained from DMT tests

• Type: Article in International Scientific Journal
• Date: 2012

Authors

Nuno Cruz (Author) Other; Carlos Rodrigues (Author) Other; António Viana da Fonseca (Author) FEUP

Journal

Title: International Journal of Geotechnical Engineering

Vol. 6 No. 2

Pages: 239-244

ISSN: 1938-6362

Publisher: Taylor & Francis

Indexing

Scopus

INSPEC

Scientific classification

FOS: Engineering and technology > Civil engineering

CORDIS: Technological sciences > Engineering > Civil engineering > Geotechnics

Other information

DOI: 10.3328/IJGE.2012.06.02.239-244

Abstract (EN): : Cemented soils are often seen as non-textbook materials, since they don´t fit into the usual behavior of transported soils in the light of classical Soil Mechanics theories. This fact creates several problems on the interpretation of in-situ test results, when the classical approaches are used, limiting the application of common in-situ tests. Departing from a long experience in characterizing Portuguese granitic soils with Marchetti¿s Dilatometer (DMT) a large calibration box (CemSoil Box) was constructed to work with artificially cemented silty sands, aiming the evaluation of static penetration influence in the loss of cementation strength, and the overall effects on the stiffness response, giving rise to adequate correlations for deriving design parameters. The experience was based in the development of artificially samples tested in triaxial cell and in the CemSoil Box, where blades could be pre-installed and pushed in. Water level, suction and seismic velocities were monitored during the experience. The final results allowed for the establishment of specific correlations to derive strength (cohesion intercept and angles of shearing resistance) and stiffness (deformability and small strain shear modulus) parameters, as well as a specific methodology for controlling suction influence on the respective results.

Language: English

Type (Professor's evaluation): Scientific

Notes: www.jrosspub.com: DOI: 10.3328/IJGE.2012.06.02.239-244