Evaluating the freeze-thaw phenomenon in sandwich-structured composites via numerical simulations and infrared thermography

• Type: Article in International Scientific Journal
• Date: 2020

Authors

Stefano Sfarra (Author) Other; Blanca Tejedor (Author) Other; Stefano Perilli (Author) Other; Ricardo M. S. F. Almeida (Author) Other; Eva Barreira (Author) FEUP

Journal

Title: Journal of Thermal Analysis and Calorimetry

Pages: 1-19

ISSN: 1388-6150

Publisher: Springer Nature

Indexing

ISI Web of Knowledge - 0 Citations

Scopus - 0 Citations

Other information

Authenticus ID: P-00S-F4E

DOI: 10.1007/s10973-020-09985-1

Abstract (EN): The water ingress phenomenon in sandwich-structured composites used in the aerospace/aeronautical sector is a current issue. This type of defect can cause in the course of time several other defects at the boundary, such as corrosions, deformations, detachments. In fact, water may change its state of physical matter going towards the freeze-thaw cycle caused by the atmosphere re-entry of, e.g. space probes. In this work, the alveoli of a composite laminate have been filled with water, which was initially transformed into ice. By taking into account, the known quantity of water, the freeze-thaw cycle was simulated by Comsol Multiphysics(R)software, reproducing exactly the shape of the sandwich as well as the real conditions in which it was subsequently subjected in a climatic chamber. The experimental part consisted of monitoring the front side of the specimen by means of a thermal camera operating into the long-wave infrared spectrum, and by setting both the temperature and the relative humidity of the test chamber according to the values imposed during the numerical simulation step. It was found that the numerical and experimental temperature trends are in good agreement with each other since the model was built by following a physico-chemical point-of-view. It was also seen that the application of the independent component thermography (ICT) technique was able both to retrieve the positions of the defects (i.e. the water inclusions) and to characterize the defects in which a detachment (fabricated between the fibres and the resin) is present; the latter was realized above an inclusion caused by the water ingress. To the best of our knowledge, this is the first time that ICT is applied to satisfy this purpose.

Language: English

Type (Professor's evaluation): Scientific

No. of pages: 19