Go to:
Logótipo
Você está em: Start > Publications > View > Seismic risk assessment of cold-formed steel shear wall systems
Map of Premises
Principal
Publication

Seismic risk assessment of cold-formed steel shear wall systems

Title
Seismic risk assessment of cold-formed steel shear wall systems
Type
Article in International Scientific Journal
Year
2017
Authors
Kechidi, S
(Author)
Other
The person does not belong to the institution. The person does not belong to the institution. The person does not belong to the institution. Without AUTHENTICUS Without ORCID
Macedo, L
(Author)
Other
The person does not belong to the institution. The person does not belong to the institution. The person does not belong to the institution. Without AUTHENTICUS Without ORCID
Bourahla, N
(Author)
Other
The person does not belong to the institution. The person does not belong to the institution. The person does not belong to the institution. Without AUTHENTICUS Without ORCID
Journal
Vol. 138
Pages: 565-579
ISSN: 0143-974X
Publisher: Elsevier
Other information
Authenticus ID: P-00M-XMZ
Abstract (EN): This paper presents the probabilistic seismic performance and risk assessment of cold-formed steel (CFS) sheathed shear wall panel (SWP) structures adopting conventional steel moment-resisting frame (MRF) systems as a benchmark with the aim of exploring the viability of using CFS-SWP as a new structural solution in seismic prone regions. A set of 12 building structures of both systems, with 2-, 4- and 5-storey, have been designed for two seismic intensity levels. To simulate their nonlinear behaviour, the structures were modelled adopting recently developed deteriorating hysteresis models. Based on probabilistic seismic hazard analyses (PSHA), a site-specific selection of ground motion records for Incremental Dynamic Analyses (IDA) has been carried out adopting the Conditional Mean Spectrum (CMS) as a more realistic target response spectrum. Subsequently, the seismic risk was evaluated over the structure lifetime (i.e., 50 years) in terms of the annual probability of exceeding the Damage Limitation, No-Local Collapse and Near Collapse limit states. The importance and usefulness of the risk metrics are highlighted and adopted as an indicator to explore the behavioural features of both structural systems. Overall, the assessment procedure showed that both systems present an acceptable seismic performance and therefore the CFS-SWP can be seen as a reliable structural solution to achieve performance based objectives in seismic regions.
Language: English
Type (Professor's evaluation): Scientific
No. of pages: 15
Documents
We could not find any documents associated to the publication.
Related Publications

Of the same journal

ULCF assessment of X52 piping steel by means of cyclic bending tests (2017)
Article in International Scientific Journal
Fernandes, AA; Abilio M P De Jesus; Pereira,J.; Xavier,J.
Seismic design procedure for cold-formed steel sheathed shear wall frames: Proposal and evaluation (2017)
Article in International Scientific Journal
Kechidi, S; Bourahla, N; J. M. Castro
Practical considerations on the design of concentrically-braced steel frames to Eurocode 8 (2019)
Article in International Scientific Journal
A. Silva; José M. Castro; R. Monteiro
Post-rehabilitation Assessment of a Centenary Steel Bridge Through Numerical and Experimental Analysis (2013)
Article in International Scientific Journal
Filipe Cavadas; Carlos Rodrigues; Carlos Félix; Joaquim Figueiras
Monotonic and cyclic flexural behaviour of square/rectangular rubberized concrete-filled steel tubes (2017)
Article in International Scientific Journal
Silva, A; Jiang, Y; J. M. Castro; Silvestre, N; Monteiro, R

See all (24)

Recommend this page Top
Copyright 1996-2025 © Faculdade de Medicina Dentária da Universidade do Porto  I Terms and Conditions  I Acessibility  I Index A-Z  I Guest Book
Page created on: 2025-07-06 at 13:30:14 | Acceptable Use Policy | Data Protection Policy | Complaint Portal