Second-order multi-scale modelling of natural and architected materials in the presence of voids: Formulation and numerical implementation

• Tipo: Artigo em Revista Científica Internacional
• Data: 2023

Autores

dos Santos, WF (Autor) Outra; Lopes, IAR (Autor) Outra; F.M. Andrade Pires (Autor) FEUP; Proença, SPB (Autor) Outra

Revista

Título: Computer Methods in Applied Mechanics and Engineering

Vol. 416

ISSN: 0045-7825

Editora: Elsevier

Indexação

ISI Web of Knowledge - 0 Citações

Outras Informações

ID Authenticus: P-00Y-YWH

DOI: 10.1016/j.cma.2023.116374

Abstract (EN): This contribution proposes a second-order computational homogenisation formulation for natural and architected materials in the presence of voids. The macro-scale is described by a second gradient continuum theory in the finite strain regime, and the micro-scale is modelled by the concept of representative volume element (RVE) within the classical first-order continuum mechanics. The Method of Multi-scale Virtual Power is employed to link the two scales, ensuring a variationally consistent scale transition. Unlike the multi-scale model proposed by Rodrigues Lopes and Andrade Pires (2022), the developed formulation allows the consideration of voids in the RVE domain and boundary, which is critical for modelling cellular materials, lattice structures, and metamaterials, among others. This is achieved by defining the kinematical quantities only in the solid domain of the RVE and postulating a new homogenisation relation for the second-order gradient. The kinematic constraints are imposed on the RVE by the Lagrange multiplier method and particularised for minimal (lower bound), periodic and direct (upper bound) conditions. It is demonstrated that the homogenised macroscopic stress tensors can be expressed in terms of the Lagrange multipliers. The finite element method is adopted for the numerical solution of the micro and macro equilibrium. The Newton- Raphson scheme is employed to solve the non-linear systems of equations at both scales and the consistent macroscopic tangents required for the FE2 framework are derived. Several numerical examples of porous solids, lattice structures and metamaterials illustrate the consistency and applicability of the formulation for two and three-dimensional problems. (c) 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 51