Sequential determination of calcium and magnesium cations in haemodialysis solutions by FIA

• Tipo: Artigo em Revista Científica Internacional
• Data: 1997

Autores

Lapa, RAS (Autor) FFUP; Lima, JLFC (Autor) FFUP; Vela, MH (Autor) Outra; Barrado, E (Autor) Outra

Revista

Título: Analytical Sciences

Vol. 13

Páginas: 409-414

ISSN: 0910-6340

Editora: Japan Society for Analytical Chemistry

Indexação

ISI Web of Knowledge - 3 Citações

Scopus - 4 Citações

Outras Informações

ID Authenticus: P-001-B8N

DOI: 10.2116/analsci.13.409

Abstract (EN): This work reports on the development, optimization and application of an FIA manifold to the sequential determination of calcium and magnesium cations in haemodialysis solutions. A tubular electrode sensitive to calcium and an atomic absorption spectrophotometer to measure magnesium were used as a detection processed. The system included a dialysis unit to enable sample dilution, since they presented high levels of the species to be determined. The system performance was optimized to obtain the maximum slope of calibration lines to Ca2+ and Mg2+ by means of the Taguchi Parameters Design (TPD). An L-9(3(4)) saturated orthogonal array led to the following optimized conditions: flow rate, 3.0 ml/min; sample volume injected, 20 mu l; reactor length, 100 cm; ionic strength, 3 M. Under these conditions, the analytical procedure was robust and lead to reproducible results which were insensitive to variations in the glucose concentration. The developed system presents a high sampling rate (80 samples/h). The results obtained by the FIA system were compared with those given by the process of visual titration (10 samples/h) used as a reference method; it was found that both methods were in good agreement.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 6