Size effects on the tensile and compressive failure of notched composite laminates

• Tipo: Artigo em Revista Científica Internacional
• Data: 2013

Autores

Ercin, GH (Autor) Outra; Camanho, PP (Autor) FEUP; Xavier, J (Autor) Outra; Catalanotti, G (Autor) Outra; Mandi, S (Autor) Outra; Linde, P (Autor) Outra

Revista

Título: Composite Structures

Vol. 96

Páginas: 736-744

ISSN: 0263-8223

Editora: Elsevier

Indexação

ISI Web of Knowledge - 102 Citações

ISI Web of Science

Scopus - 110 Citações

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia dos materiais

Outras Informações

ID Authenticus: P-002-0VX

DOI: 10.1016/j.compstruct.2012.10.004

Abstract (EN): An experimental and analytical investigation of the effect of size on the strength of composite laminates with central holes loaded in tension and compression is presented. Specimens with different hole sizes and with constant width-to-diameter ratios were tested in tension and compression under quasi-static loading and the strength reduction for increasing sizes was quantified for two lay-ups and for the two loading conditions. The first-ply failure load of the outer ply was identified using a new method that post-processes the displacement field obtained using the digital image correlation technique. The accuracy of the available strength prediction methods (point and average stress methods, inherent flaw model, semi-analytical cohesive zone model and finite fracture mechanics) to simulate the effect of size on the strength of notched composites is discussed. It is shown that the finite fracture mechanics model is the most accurate method.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 9