Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > A quasi-3D hyperbolic shear deformation theory for the static and free vibration analysis of functionally graded plates
Mapa das Instalações
Edifício Principal | Main Building Edifício Pós-Graduações | Post-Graduate Building

A quasi-3D hyperbolic shear deformation theory for the static and free vibration analysis of functionally graded plates

Título
A quasi-3D hyperbolic shear deformation theory for the static and free vibration analysis of functionally graded plates
Tipo
Artigo em Revista Científica Internacional
Ano
2012
Autores
Ferreira, AJM
(Autor)
FEUP
Carrera, E
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Cinefra, M
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Roque, CMC
(Autor)
FEUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
Jorge, RMN
(Autor)
FEUP
Soares, CMM
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Ver página do Authenticus Sem ORCID
Revista
Título: Composite StructuresImportada do Authenticus Pesquisar Publicações da Revista
Vol. 94 11
Páginas: 1814-1825
ISSN: 0263-8223
Editora: Elsevier
Indexação
Classificação Científica
FOS: Ciências da engenharia e tecnologias > Engenharia dos materiais
CORDIS: Ciências Tecnológicas > Engenharia > Engenharia mecânica
Outras Informações
ID Authenticus: P-002-BEJ
Abstract (EN): This paper presents an original hyperbolic sine shear deformation theory for the bending and free vibration analysis of functionally graded plates. The theory accounts for through-the-thickness deformations. Equations of motion and boundary conditions are obtained using Carrera's Unified Formulation and further interpolated by collocation with radial basis functions. The efficiency of the present approach combining the new theory with this meshless technique is demonstrated in several numerical examples, for the static and free vibration analysis of functionally graded plates. Excellent agreement for simply-supported plates with other literature results has been found.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Contacto: ferreira@fe.up.pt
Nº de páginas: 12
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Dos mesmos autores

Static, free vibration and buckling analysis of isotropic and sandwich functionally graded plates using a quasi-3D higher-order shear deformation theory and a meshless technique (2013)
Artigo em Revista Científica Internacional
Neves, AMA; Ferreira, AJM; Carrera, E; Cinefra, M; Roque, CMC; Jorge, RMN; Soares, CMM
Free vibration analysis of functionally graded shells by a higher-order shear deformation theory and radial basis functions collocation, accounting for through-the-thickness deformations (2013)
Artigo em Revista Científica Internacional
Neves, AMA; Ferreira, AJM; Carrera, E; Cinefra, M; Roque, CMC; Jorge, RMN; Soares, CMM
Bending of FGM plates by a sinusoidal plate formulation and collocation with radial basis functions (2011)
Artigo em Revista Científica Internacional
Neves, AMA; Ferreira, AJM; Carrera, E; Roque, CMC; Cinefra, M; Jorge, RMN; Soares, CMM
A quasi-3D sinusoidal shear deformation theory for the static and free vibration analysis of functionally graded plates (2012)
Artigo em Revista Científica Internacional
Neves, AMA; Ferreira, AJM; Carrera, E; Roque, CMC; Cinefra, M; Jorge, RMN; Soares, CMM

Das mesmas áreas científicas

Arte, Design e Produto (2007)
Resumo de Comunicação em Conferência Nacional
António Torres Marques; Fernando Jorge Lino Alves; Célia Novo
Thermoplastic matrix composites from towpregs (2011)
Capítulo ou Parte de Livro
João Silva; João Nunes; C. A. Bernardo; António Marques
Strain path and work-hardening behavior of brass (2009)
Artigo em Revista Científica Internacional
Sakharova, NA; Fernandes, JV; Vieira, MF
Microstructural plastic behaviour of AISI 304 austenitic stainless steel (2004)
Artigo em Revista Científica Internacional
M. M. Vieira; B. M. Chaparro; Manuel Vieira; J. V. Fernandes
Measurement of resistance curves in the longitudinal failure of composites using digital image correlation (2010)
Artigo em Revista Científica Internacional
Catalanotti, G; Camanho, PP; Xavier, J; Davila, CG; Marques, AT

Ver todas (20)

Da mesma revista

Smart composites and composite structures In honour of the 70th anniversary of Professor Carlos Alberto Mota Soares (2016)
Outra Publicação em Revista Científica Internacional
Benjeddou, A; Araujo, AL; Carrera, E; Reddy, JN; António Torres Marques; Mota Soares, CMM
Simplified stress analysis of functionally graded single-lap joints subjected to combined thermal and mechanical loads (2018)
Outra Publicação em Revista Científica Internacional
Paroissien, E; da Silva, LFM; Lachaud, F
Reinforcement of CFRP single lap joints using metal laminates (2019)
Outra Publicação em Revista Científica Internacional
Morgado, MA; Ricardo Carbas; Marques, EAS; da Silva, LFM
Multifunctional Material Systems: A state-of-the-art review (2016)
Outra Publicação em Revista Científica Internacional
Ferreira, ADBL; Novoa, PRO; António Torres Marques

Ver todas (193)

Recomendar Página Voltar ao Topo
Copyright 1996-2024 © Faculdade de Economia da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z  I Livro de Visitas
Página gerada em: 2024-09-27 às 22:26:52 | Política de Utilização Aceitável | Política de Proteção de Dados Pessoais | Denúncias
SAMA2