Bond Analysis of Timber Structures Strengthened with FRP Systems

• Tipo: Artigo em Revista Científica Internacional
• Data: 2012

Autores

Luís Filipe Pereira Juvandes (Autor) FEUP; Rui Barbosa (Autor) FEUP

Revista

Título: Strain

Vol. 48 Nº 2

Páginas: 124-135

ISSN: 0039-2103

Editora: Wiley-Blackwell

Indexação

ISI Web of Knowledge - 6 Citações

ISI Web of Science

Scopus - 9 Citações

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia civil

CORDIS: Ciências Tecnológicas > Engenharia > Engenharia civil > Engenharia estrutural ; Ciências Tecnológicas > Engenharia > Engenharia de materiais

Outras Informações

ID Authenticus: P-002-BNW

DOI: 10.1111/j.1475-1305.2011.00804.x

Abstract (EN): This study focuses on the adhesion analysis of glued joints between Norway Spruce and Carbon fibre reinforced polymer (CFRP) regarding timber reinforcement. An experimental programme was carried out on two different test series to evaluate the behaviour of timber-CFRP bonded joints. Pull-Off tests were achieved to evaluate the strength of the adhesion connection between materials. Two strengthening techniques [externally bonded reinforcement (EBR), near-surface mounted (NSM)] and several composite systems (laminate, sheets and textile) were analysed. Through Four Point Bending tests, the adhesion behaviour of timber-CFRP joints along the fibres direction was evaluated. Three trials were performed on models strengthened with different criteria (one EBR and two NSM series), each with three different bonding lengths. The maximum anchor strength of the composite, the effective bonding length between the materials, the medium shear strength developed along the interface and the maximum composite strain for the EBR and NSM reinforcements were obtained. The experimental results were compared with equivalent values from concrete-CFRP joints found in literature. Furthermore, the theoretical model proposed in Fib Bulletin 14 was calibrated to predict the maximum anchor strength of the composite according to its bonding length. Finally, some recommendations are proposed for the design of timber structures reinforced with CFRP systems.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 12