Fracture toughness determination of adhesive and co-cured joints in natural fibre composites

• Type: Article in International Scientific Journal
• Date: 2013

Authors

Campilho, RDSG (Author) Other; Moura, DC (Author) Other; Goncalves, DJS (Author) Other; da Silva, JFMG (Author) Other; Banea, MD (Author) FEUP; da Silva, LFM (Author) FEUP

Journal

Title: Composites Part B: Engineering

Vol. 50

Pages: 120-126

ISSN: 1359-8368

Publisher: Elsevier

Indexing

ISI Web of Knowledge - 68 Citations

Scopus - 86 Citations

Scientific classification

FOS: Engineering and technology > Other engineering and technologies

Other information

Authenticus ID: P-004-ZSR

DOI: 10.1016/j.compositesb.2013.01.025

Abstract (EN): Adhesive bonding has become more efficient in the last few decades due to the adhesives developments, granting higher strength and ductility. On the other hand, natural fibre composites have recently gained interest due to the low cost and density. It is therefore essential to predict the fracture behavior of joints between these materials, to assess the feasibility of joining or repairing with adhesives. In this work, the tensile fracture toughness (G(n)(c)) of adhesive joints between natural fibre composites is studied, by bonding with a ductile adhesive and co-curing. Conventional methods to obtain G(n)(c) are used for the co-cured specimens, while for the adhesive within the bonded joint, the J-integral is considered. For the J-integral calculation, an optical measurement method is developed for the evaluation of the crack tip opening and adherends rotation at the crack tip during the test, supported by a Matlab sub-routine for the automated extraction of these quantities. As output of this work, an optical method that allows an easier and quicker extraction of the parameters to obtain G(n)(c) than the available methods is proposed (by the J-integral technique), and the fracture behaviour in tension of bonded and co-cured joints in jute-reinforced natural fibre composites is also provided for the subsequent strength prediction. Additionally, for the adhesively-bonded joints, the tensile cohesive law of the adhesive is derived by the direct method.

Language: English

Type (Professor's evaluation): Scientific

No. of pages: 7