Two-Dimensional CrCl3 Nanosheets via Liquid-Phase Exfoliation in Aqueous Medium for Spintronic Applications

• Type: Article in International Scientific Journal
• Date: 2025

Authors

Silva, FALS (Author) Other; Chang, HP (Author) Other; Hernandez, L (Author) Other; Warner, JH (Author) Other; Cole, A (Author) Other; Tafti, F (Author) Other; Fernandes, JR (Author) Other; Santos, SG (Author) Other; Magalhaes, FD (Author) Other; Artur Pinto (Author) FEUP; Incorvia, JAC (Author) Other

Journal

Title: ACS Applied Nano Materials

Publisher: American Chemical Society

Indexing

ISI Web of Knowledge - 0 Citations

Scopus - 0 Citations

Other information

Authenticus ID: P-018-SG0

DOI: 10.1021/acsanm.5c01733

Abstract (EN): Chromium trihalides, like CrCl3, are part of an emerging class of van der Waals materials that have been showing promise for their magnetic properties. However, CrCl3 has been produced only by mechanical tape exfoliation, a low yield method, and by liquid exfoliation in organic solvents, with a negative impact on the environment and human health. Here, CrCl3 was produced for the first time by liquid-phase exfoliation (LPE) in aqueous medium, in the presence of polyvinylpyrrolidone (PVP10) or sodium dodecyl sulfate (SDS), followed by ultrasonication. It was also the first time that CrCl3 was obtained with nanometric size (<100 nm), and its photothermal, magnetic, and water stability performances were studied. Results showed that CrCl3 + SDS (zeta potential = -19.9 mV) had better water stability than CrCl3 + PVP10 (zeta potential = 8.6 mV). CrCl3 + SDS and CrCl3 + PVP10 were obtained with a mean particle lateral size of 39.4 +/- 15.9 and 65.6 +/- 47.4 nm and a mean thickness of 4.4 +/- 3.9 and 7.1 +/- 5.3 nm, respectively. Both materials revealed a similar ability to convert near-infrared light into heat, showing a temperature increase of 4.7 degrees C (CrCl3 + SDS) and 5.8 degrees C (CrCl3 + PVP10) after 30 min of irradiation. Results show that the presence of SDS during production leads to a loss of Cl atoms when compared to PVP10, but crystallinity is preserved. Magnetometry measurements show a N & eacute;el temperature of 15 K +/- 2.0 K for both samples, showing its antiferromagnetism. A Curie-Weiss analysis indicates a ferromagnetic dominant paramagnetic phase due to the positive Curie-Weiss temperatures, with the calculated effective moments as 4.20 mu(B) +/- 0.63 mu(B) and 3.95 mu(B) +/- 0.49 mu(B) for CrCl3 + PVP10 and CrCl3 + SDS, respectively. These results show that LPE of CrCl3 with PVP10 or SDS produces 2D CrCl3, preserving crystallinity and magnetic properties, and demonstrating potential for spintronic applications.

Language: English

Type (Professor's evaluation): Scientific

No. of pages: 13