Determination of cohesive laws in wood bonded joints under mode I loading using the DCB test

• Type: Article in International Scientific Journal
• Date: 2013

Authors

Filipe G A Silva (Author) Other; Jose Xavier (Author) Other; Fabio A M Pereira (Author) Other; Jose J L Morais (Author) Other; Nuno Dourado (Author) Other; Marcelo F S F Moura (Author) FEUP

Journal

Title: Holzforschung

Vol. 67

Pages: 913-922

ISSN: 0018-3830

Publisher: Walter De Gruyter

Indexing

ISI Web of Knowledge - 13 Citations

ISI Web of Science

Scopus - 17 Citations

Scientific classification

FOS: Agrarian Sciences > Agriculture, Forestry, and Fisheries

Other information

Authenticus ID: P-008-HP1

DOI: 10.1515/hf-2013-0012

Abstract (EN): The cohesive laws (CLs) have been investigated by means of direct and inverse methods concerning wood bonded joints under pure mode I. The experimental results were obtained by tests with double cantilever beam. The direct method is based on the differentiation of the relation between strain energy release rate and crack opening displacement at the crack tip. An equivalent crack method was used to evaluate the strain energy release rate in the course of the test without monitoring the crack length, which is difficult to observe exactly. The crack opening displacement was determined by postprocessing local displacements measured by digital image correlation. The inverse method requires a previous assumption of the CL shape, and as such, a trilinear law with bilinear softening relationship was selected. The cohesive parameters were identified by an optimization procedure involving a developed genetic algorithm. The idea is to minimize an objective function that quantifies the difference between the experimental and the numerical load-displacement curves resulting from the application of a given law. A validation procedure was performed based on a numerical analysis with finite elements. Both methods in focus provided good agreement with the experimental data. It was observed that CLs adopted by the inverse method are consistent with the ones obtained with the direct method.

Language: English

Type (Professor's evaluation): Scientific

No. of pages: 10