Femtosecond laser direct written off-axis fiber Bragg gratings for sensing applications

• Type: Article in International Scientific Journal
• Date: 2020

Authors

Viveiros, D (Author) FCUP; Amorim, VA (Author) Other; Maia, JM (Author) Other; Susana Silva (Author) FCUP; Frazao, O (Author) FCUP; Jorge, PAS (Author) FCUP; Fernandes, LA (Author) Other; Marques, PVS (Author) FCUP

Journal

Title: Optics and Laser Technology

Vol. 128

ISSN: 0030-3992

Publisher: Elsevier

Indexing

ISI Web of Knowledge - 11 Citations

Scopus - 11 Citations

Other information

Authenticus ID: P-00R-Y3W

DOI: 10.1016/j.optlastec.2020.106227

Abstract (EN): First order off-axis fiber Bragg gratings (FBGs) were fabricated in a standard single mode fiber (SMF-28e) through femtosecond laser direct writing. A minimum offset distance between the grating and core center of 2.5 mu m was found to create a multimode section, which supports two separate fiber modes (LP0,1 and LP1,1), each split into two degenerate polarization modes. The resulting structure breaks the cylindrical symmetry of the fiber, introducing birefringence (approximate to 10(-4)) resulting in a polarization dependent Bragg wavelength for each mode. Based on the modal and birefringence behavior, three off-axis FBGs were fabricated with 3.0, 4.5 and 6.0 mu m offsets from the core center, and then characterized in strain, temperature, and curvature. The tested off-axis FBGs exhibited a similar strain sensitivity of similar to 1.14 pm/mu epsilon and a temperature sensitivity of similar to 12 pm/C. The curvature and orientation angle were simultaneously monitored by analyzing the intensity fluctuation and the wavelength shift of the LP1,1 Bragg resonance. A maximum curvature sensitivity of 0.53 dB/m(-1) was obtained for the off-axis FBG with a 3.0 mu m offset.

Language: English

Type (Professor's evaluation): Scientific

No. of pages: 9