Go to:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Start > Publications > View > Friction torque in thrust ball bearings lubricated with polymer greases of different thickener content
Publication

Publications

Friction torque in thrust ball bearings lubricated with polymer greases of different thickener content

Title
Friction torque in thrust ball bearings lubricated with polymer greases of different thickener content
Type
Article in International Scientific Journal
Year
2016
Authors
Pinho, S
(Author)
Other
The person does not belong to the institution. The person does not belong to the institution. The person does not belong to the institution. Without AUTHENTICUS Without ORCID
Graca, B
(Author)
Other
The person does not belong to the institution. The person does not belong to the institution. The person does not belong to the institution. Without AUTHENTICUS Without ORCID
Campos, AV
(Author)
Other
The person does not belong to the institution. The person does not belong to the institution. The person does not belong to the institution. Without AUTHENTICUS Without ORCID
Jorge Seabra
(Author)
FEUP
View Personal Page You do not have permissions to view the institutional email. Search for Participant Publications View Authenticus page View ORCID page
Journal
Vol. 96
Pages: 87-96
ISSN: 0301-679X
Publisher: Elsevier
Other information
Authenticus ID: P-00K-23C
Abstract (EN): In this work a series of experimental tests were performed in thrust ball bearings lubricated with polymer greases. The tested greases were formulated with the same base oil but different thickener content. A multi-purpose lithium thickened grease was also tested as reference. The friction torque was measured at constant temperature and load, while varying the rotational speed. The coefficients of friction under boundary and full film lubrication were numerically calculated through the optimization of a rolling bearing friction torque model to the experimental measurements. The results show that the higher the thickener content, the smaller is the friction torque generated by the lubricating greases, phenomenon which was found to be especially important at low speeds and low specific film thickness.
Language: English
Type (Professor's evaluation): Scientific
No. of pages: 10
Documents
We could not find any documents associated to the publication.
Related Publications

Of the same journal

Two phosphonium cation-based ionic liquids used as lubricant additive. Part II: Tribofilm analysis and friction torque loss in cylindrical roller thrust bearings at constant temperature (2017)
Article in International Scientific Journal
Hernandez Battez, AH; Carlos M C G Fernandes; Martins, RC; Graca, BM; Anand, M; Blanco, D; Jorge Seabra
Two phosphonium cation-based ionic liquids used as lubricant additive Part I: Film thickness and friction characteristics (2017)
Article in International Scientific Journal
Hernandez Battez, AH; Carlos M C G Fernandes; Martins, RC; Bartolome, M; Gonzalez, R; Jorge Seabra
Tribological performance of green nanolubricants using functionalized CaCO3 nanoparticles (2024)
Article in International Scientific Journal
Carlos M C G Fernandes
Tribocorrosion behaviour of hot pressed CoCrMo - HAP biocomposites (2015)
Article in International Scientific Journal
Doni, Z; Alves, AC; Toptan, F; Rocha, LA; Buciumeanu, M; Palaghian, L; Silva, FS
Torsional fretting wear experimental analysis of a R3 offshore steel against a PC/ABS blend (2020)
Article in International Scientific Journal
T. Pandim; T. Doca; A. R. Figueiredo; Francisco M. Andrade Pires

See all (59)

Recommend this page Top
Copyright 1996-2025 © Faculdade de Direito da Universidade do Porto  I Terms and Conditions  I Acessibility  I Index A-Z
Page created on: 2025-07-12 at 21:40:41 | Privacy Policy | Personal Data Protection Policy | Whistleblowing