Saltar para:
Logótipo
Você está em: Início > Publicações > Visualização > Surface initiated tooth flank damage Part I: Numerical model

Surface initiated tooth flank damage Part I: Numerical model

Título
Surface initiated tooth flank damage Part I: Numerical model
Tipo
Artigo em Revista Científica Internacional
Ano
2010
Autores
brandao, ja
(Autor)
FEUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
seabra, jho
(Autor)
FEUP
castro, j
(Autor)
FEUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
Revista
Título: WearImportada do Authenticus Pesquisar Publicações da Revista
Vol. 268 1
Páginas: 1-12
ISSN: 0043-1648
Editora: Elsevier
Indexação
Publicação em ISI Web of Science ISI Web of Science
INSPEC
COMPENDEX
Classificação Científica
FOS: Ciências da engenharia e tecnologias > Engenharia mecânica
Outras Informações
ID Authenticus: P-003-9ST
Resumo (PT): A numerical model for the prediction of surface initiated damage on gear tooth flanks (micropitting and mild wear) is presented. This model hinges on a model of the mixed film lubrication regime and on the application of the Dang Van high-cycle multi-axial fatigue criterion. A simulation of the meshing of spur gears is performed in order to gain some understanding of the events associated with contact fatigue surface damage.
Abstract (EN): A numerical model for the prediction of surface initiated damage on gear tooth flanks (micropitting and mild wear) is presented. This model hinges on a model of the mixed film lubrication regime and on the application of the Dang Van high-cycle multi-axial fatigue criterion. A simulation of the meshing of spur gears is performed in order to gain some understanding of the events associated with contact fatigue surface damage.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Contacto: jbrandao@inegi.up.pt; jseabra@fe.up.pt; mdc@isep.ipp.pt
Nº de páginas: 12
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Dos mesmos autores

Traction curves and rheological parameters of fully formulated gear oils (2011)
Artigo em Revista Científica Internacional
brandao, ja; meheux, m; seabra, jho; ville, f; castro, mjd
Surface initiated tooth flank damage. Part II: Prediction of micropitting initiation and mass loss (2010)
Artigo em Revista Científica Internacional
brandao, ja; seabra, jho; castro, j
Surface damage prediction during an FZG gear micropitting test (2012)
Artigo em Revista Científica Internacional
Jose A Brandao; Ramiro Martins; Jorge H O Seabra; Manuel J D Castro
Comparative overview of five gear oils in mixed and boundary film lubrication (2012)
Artigo em Revista Científica Internacional
brandao, ja; meheux, m; ville, f; seabra, jho; castro, j
Gear micropitting: model and validation (2010)
Artigo em Livro de Atas de Conferência Internacional
brandao, ja; seabra, jho; castro, mjd

Da mesma revista

Wear behaviour of uncoated and diamond coated Si3N4 tools under severe turning conditions (2007)
Artigo em Revista Científica Internacional
Martinho, RP; Silva, FJG; Baptista, APM
Wear and scuffing of austempered ductile iron gears (1998)
Artigo em Revista Científica Internacional
magalhaes, l; seabra, j
Wear and scuffing of Austempered Ductile Iron (ADI) Gears (1998)
Artigo em Revista Científica Internacional
L. Magalhães; J. Seabra
Tribological behaviour of food grade polymers against stainless steel in dry sliding and with sugar (2002)
Artigo em Revista Científica Internacional
Seabra, LC; Baptista, AM
Tribological behaviour of epoxy based composites for rapid tooling (2006)
Artigo em Revista Científica Internacional
Pedro V. Vasconcelos; F. Jorge Lino; António M. Baptista; Rui Neto

Ver todas (36)

Recomendar Página Voltar ao Topo
Copyright 1996-2024 © Faculdade de Arquitectura da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z  I Livro de Visitas
Página gerada em: 2024-09-01 às 00:22:16 | Política de Utilização Aceitável | Política de Proteção de Dados Pessoais | Denúncias