Saltar para:
Logótipo
Você está em: Início > Publicações > Visualização > Characterization of composite bonded joints under pure mode II fatigue loading
Mapa das Instalações
Ed. Principal Ed. Principal Ed. Principal

Characterization of composite bonded joints under pure mode II fatigue loading

Título
Characterization of composite bonded joints under pure mode II fatigue loading
Tipo
Artigo em Revista Científica Internacional
Ano
2013
Autores
Maria V Fernandez
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Marcelo F S F de Moura
(Autor)
FEUP
Lucas F M da Silva
(Autor)
FEUP
Antonio T Marques
(Autor)
FEUP
Revista
Título: Composite StructuresImportada do Authenticus Pesquisar Publicações da Revista
Vol. 95
Páginas: 222-226
ISSN: 0263-8223
Editora: Elsevier
Indexação
Classificação Científica
FOS: Ciências da engenharia e tecnologias > Engenharia dos materiais
Outras Informações
ID Authenticus: P-002-25D
Abstract (EN): An experimental investigation concerning adhesively bonded composite joints subjected to mode II fatigue loading was performed in this work. End-Notched Flexure (ENF) tests with carbon/epoxy adherends bonded with a ductile epoxy adhesive were used. The Paris-law which establishes a relationship between the fatigue crack growth rate and the variation of the energy release rate was applied. The energy release rate was estimated by means of an equivalent crack length method based on specimen compliance and beam theory. The proposed method includes the effect of the adhesive on the specimen compliance and overcomes the difficulty associated to crack length monitoring during the test, since the crack is not a measured parameter but a calculated one. Additionally, the presence of a non-negligible fracture process zone is accounted for, since the equivalent crack is estimated from the specimen compliance which is influenced by the presence of the fracture process zone. This is a crucial issue, particularly when adhesives with some ductility are used in fatigue tests. Several experimental ENF fatigue tests were performed and consistent results were obtained. It was concluded that the proposed procedure is adequate for fatigue characterization of composite bonded joints under mode II loading.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Contacto: mfmoura@fe.up.pt
Nº de páginas: 5
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Da mesma revista

Smart composites and composite structures In honour of the 70th anniversary of Professor Carlos Alberto Mota Soares (2016)
Outra Publicação em Revista Científica Internacional
Benjeddou, A; Araujo, AL; Carrera, E; Reddy, JN; António Torres Marques; Mota Soares, CMM
Simplified stress analysis of functionally graded single-lap joints subjected to combined thermal and mechanical loads (2018)
Outra Publicação em Revista Científica Internacional
Paroissien, E; da Silva, LFM; Lachaud, F
Reinforcement of CFRP single lap joints using metal laminates (2019)
Outra Publicação em Revista Científica Internacional
Morgado, MA; Ricardo Carbas; Marques, EAS; da Silva, LFM
Multifunctional Material Systems: A state-of-the-art review (2016)
Outra Publicação em Revista Científica Internacional
Ferreira, ADBL; Novoa, PRO; António Torres Marques

Ver todas (197)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Desporto da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-07-31 às 03:06:47 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico