Thermal Study of a Cladding Layer of Inconel 625 in Directed Energy Deposition (DED) Process Using a Phase-Field Model

• Tipo: Outras Publicações
• Data: 2021

Autores

Darabi, R (Autor) Outra; Ferreira, A (Autor) Outra; Azinpour, E (Autor) Outra; de Sa, JC (Autor) Outra; Ana Reis (Autor) FEUP

Outras Informações

ID Authenticus: P-00W-9X3

DOI: 10.21203/rs.3.rs-866393/v1

Abstract (EN): <jats:title>Abstract</jats:title> <jats:p>In an effort to simulate the involved thermal physical effects that occur in direct energy deposition (DED) a thermodynamically-consistent of phase-field method is developed. Two state parameters, characterizing phase change and consolidation, are used to allocate the proper material properties to each phase. The numerical transient solution is obtained via a finite element analysis. A set of experiments for single tracks scanning were carried out to provide dimensional data of the deposited cladding lines. By relying on a regression analytical formulation to establish the link between process parameters and geometries of deposited layers from experiments, an activation of passive elements in the finite element discretization is considered. The single-track cladding of Inconel 625 powder on tempered steel 42CrMo4 was printed with different power, scanning speed and feed-rate to assess their effect on the morphology of the melt pool and the solidification cooling rate. The predicted dimensions of melt pools were compared with experiments reported in the literature. In addition, this research correlated the used process parameter in the modelling of localized transient thermal with solidification parameters, namely, the thermal gradient<jats:italic> (G)</jats:italic> and the solidification rate <jats:italic>(R).</jats:italic></jats:p>

Idioma: Inglês

Tipo (Avaliação Docente): Científica